Mass Flow Meter, Digital High Performance with Multiple Gas Capability - SmartTrak® C100
/Mass Flow Meter, Digital High Performance with Multiple Gas Capability (Dial-A-Gas®). For flow ranges from 0 to 10 sccm to 0-1000 slpm.
Read MoreMass Flow Meter, Digital High Performance with Multiple Gas Capability (Dial-A-Gas®). For flow ranges from 0 to 10 sccm to 0-1000 slpm.
Read MoreFor flow ranges under 4 sccm (smlm) with a minimum controllable mass flow rate of 0.1 sccm (smlm).
Read MoreHigh application flexibility and stable long term accuracy for any gas, including toxics and corrosives.
Read MoreFor measurement and control of any clean, dry gas mass flow from 10 to 1000 SLPM, with lower flows and higher flows available upon request.
Read MoreFor precision gas mass flow control of expensive process gases, where minimal pressure drop is a key consideration for cost savings and efficiency.
Read MoreIdeal for process monitoring, gas blending and flow calibration applications among many others.
Read MoreFor measurement of air and ALL inert gases & mixtures in flow ranges from 0-10 sccm up to 0-50 slpm.
Read MoreEconomical Analog Mass Flow Controller for flow ranges from 0-10 sccm to 0-50 slpm.
Read MoreMass or volumetric flow monitoring of gases, liquids and steam and a compact, low-cost alternative to Coriolis meters.
Read MoreIdeal for wastewater treatment applications, hazardous areas, facilities management, and general process control applications where high accuracy is critical.
Read MoreIdeal meter for measuring gas flow in cramped or constrained piping environments where long straight pipe runs simply do not exist.
Read MoreFor chlorine injection processes found in typical waste-water treatment applications.
Read MoreHigh accuracy portable clamp-on ultrasonic liquid flow meter.
Read MoreHigh accuracy transit-time ultrasonic liquid flow meter with thermal energy/BTU capability.
Read MoreFor compressed air flow, aeration basin air flow, combustion air flow, natural gas fuel flow, custody transfer and stack gas emissions flow monitoring.
Read MoreIdeal for custody transfer, wastewater treatment, hazardous areas, facilities management and general process control applications where high accuracy is critical.
Read MoreFor light industrial applications where a NEMA 4X (IP65) enclosure is acceptable.
Read MoreFor precise natural gas measurement to heaters and boilers to increase efficiency.
Read MoreMass flow switch for the detection of the mass flow rate of liquids and gases.
Read MoreLiquid Level Switch for the detection of the liquid level in tanks and process vessels.
Read MoreA manufacturer's rep for engineers who insist on
knowledgeable product and application support.
Automatic Controls Co., Inc.
2231-B Ampere Drive
Louisville, KY 40299
Phone: 502-266-6640
Fax: 502-266-6588
Email: support@automaticcontrolsky.com
Copyright © Automatic Controls Co. All rights reserved.